"DIY Bay™ Golf Simulator Hitting Enclosure for Home Use"

The AllSportSystems DIY Bay™ is an indoor golf simulator enclosure designed to deliver maximum value through a straightforward, customizable build. The entire bay is wrapped in a single-piece RipStop black fabric that covers all sides and the top, creating a clean and contained hitting environment. The impact screen installs directly on the front frame using a bungee-based tensioning system, while blackout pole sleeves on the top depth poles reduce light bleed and improve projection quality. Foam wedge inserts are available as an optional add-on to protect against pole strikes. The open-front design keeps setup simple, and the enclosure is compatible with a range of optional upgrades for enhanced safety and projection. Custom sizes are available, and setup takes approximately 2 hours.

Note: Poles are not included with this enclosure. They can be purchased as an add-on EMT Pole Kit or sourced locally from a home improvement store as 1" common EMT conduit using the included cutting chart.

Features

• Single-piece RipStop black fabric wrapper covers all sides and the top of the enclosure
• Bungee-based screen tensioning system for secure and adjustable screen installation
• Blackout Velcro sleeves on top depth poles to reduce light bleed and improve image quality
• 4 detachable and replaceable RipStop black trim panels surrounding the screen perimeter
• Optional foam wedge insert kit (3×5 or 4×8) available to protect against pole strikes
• Compatible with optional baffle net for extended impact screen protection
• Compatible with optional SkyRailPLUS™ cage-attached projector mount (no ceiling drilling required)
• Compatible with optional SkyBridge™ Rigid Screen Brackets for improved screen flatness
• Compatible with optional SkyGuard™ or SkyGuardPLUS™ top and side netting system for stray shot protection
• Compatible with optional angled side netting extensions
• Fabric upgrade options available: Standard, Premium, and Elite (multilayer foam-core for superior image quality)
• Custom sizing available
• Approximately 2-hour setup time

What's Included

Fabric Components:

• 1x Black RipStop Fabric Wrapper
• 2x Black Pole Sleeves
• 1x Impact Screen
• 4x Screen/Foam Trim Panels
• 8x Foam Inserts (optional)

Connector Kit:

• 6x 3-Way Connectors
• 2x 90° Connectors

Additional Hardware:

• 1x Ball Bungee Strap

For enclosures wider than 10 feet, the connector kit also includes 3x Couplers and 6x Hex Bolts.

Poles are not included. They are available as an optional add-on (Precut EMT Pole Kit) or can be purchased locally as 1" common EMT conduit and cut to size using the included sizing chart.

Specifications

• Wrapper Material: RipStop fabric (Standard, Premium, or Elite upgrade available) Frame
• Compatibility: 1" EMT conduit (actual diameter 1-3/16" / 30.16 mm) Poles: Sold separately 
• Estimated Setup Time: ~2 hours

Documentation

DIY Bay™ Installation Guide (PDF)